Ctek MXS 3.8 Bedienungsanleitung PDF herunterladen (Seite 1)

EN • 3

CONGRATULATIONS

on the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

SMALL

BATTERY

PROGRAM

ERROR LAMP

NORMAL

BATTERY

PROGRAM

FULLY CHARGEDREADY TO USE

COLD

WEATHER

PROGRAM

POWER LAMP

HOW TO CHARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3.Press the MODE-button to select charging program.

4. Follow the 7-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 6 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE BUTTON

MANUAL

MODE

12V/3.8A

MXS 3.8

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - HOW TO CHARGE

ENEN • 3CONGRATULATIONS on the purchase of your new professional switch mode battery charger. This charger is included in a series of professional cha

Seite 2 - POWER LAMP

4 • ENBATTERY SIZE (Ah)TIME TO 80% CHARGED2Ah2h8Ah8h20Ah5h60Ah15h80Ah20hREADY TO USEThe table shows the estimated time for empty battery to 80% charge

Seite 3 - CHARGING PROGRAM

ENEN • 51VOLTAGE (V)CURRENT (A)ANALYSE PULSEDESULPHATION SOFT START BULK ABSORPTION15.8VIncreasing voltageto 14.4V0.8A3.8A until 12.6V Increasing volt

Seite 4 - TECHNICAL SPECIFICATIONS

6 • ENTECHNICAL SPECIFICATIONSModel number1070Rated Voltage AC220–240VAC, 50–60HzCharging voltage14.4V, 14.7 VMin battery voltage2.0VCharging current

Seite 5 - LIMITED WARRANTY

ENEN • 7SAFETY•The charger is designed for charging only for batteries according to the technical speciﬁcation. Do not use the charger for any other

Seite 6 - 2012-05 -30

8 • EN20018193ACTEK PRODUCTS ARE PROTECTED BY 2012-05 -30Patents Designs Trade marksEP10156636.2pending RCD 509617 TMA 669987US12/780968 pending US D