MULTI XS 7000Battery chargerFor lead-acid batteries 14–225AhUser Manual and guide to professional battery charging for Starter and Deep Cycle batterie
INTRODUCTIONCongratulations on your purchase of your new professional MULTI XS 7000 Switch Mode Charger with Pulse Maintenance, Float, Analysis and Re
MODE”NORMAL” (14.4V)Normal setting for wet batteries, MF and for most Gel batteries. Mode ”SNOWFLAKE” (14.7V)This setting is recommended for batteries
Start charging1. Connect the power cord to the power outlet. 2. Set the proper charging mode for the battery by pushing the Mode button until the corr
Analysis (Lamp 3) Charging is suspended for a short period and the battery voltage measured. If it falls too quickly, the battery is probably faulty.
MAINTENANCEThe charger is maintenance free. Note that disassembly of the charger is not permitted and will void the warranty. If the power cord is dam
MANUFACTURER’S DECLARATION CTEK SWEDEN AB, Rostugnsvägen 3, 776 70 VIKMANSHYTTAN, SWEDEN. Declares under sole responsibility that the battery charger
INDICATIONSIndication Description0 Error mode, the charger suspends the charging / voltage maintenance. See further description below.1Start mode.2
20010408B
Kommentare zu diesen Handbüchern